POWER ELECTRIC AND PNEUMATIC GLUE GUNS
Compare these prices to traditional glue guns!
 

POWER ADHESIVES 820-12 HOT MELT GLUE GUN -
EXCLUSIVE Only from Power Glue Guns
Uses 1/2" x 12" Hot Melt  Sticks   $112.00
 BUYThe NEW 820-12 is a 1/2" Glue Gun that brings a new level of
 performance and reliability to the mid-range professional glue gun market.  With an
adjustable temperature control thermostat, enabling easy adjustment of the operating
temperature to suit different glue formulations (from lowmelt to high temperature polyamides),
and to suit different applicationsVery fast warm up time in 2 to 3 minutes with and impressive
 output of over 5 1/2 lbs. of glue per hour. Illuminated on-off switch, 250W cartridge heater,
trigger stroke adjustment screw and a full hand level trigger with soft feel grip make this a
great glue gun for all of your applications that require a 1/2" glue stick


POWER ADHESIVES TEC 3200 Manual HOT MELT GLUE GUN
Uses 1 3/4" x 1 3/4" Hot Melt Cartridges
$352.74 BUYThe TEC 3200 is just needs to be plugged in and used,
no need for an airline to be hooked up. This gun is great for product assembly,
 packaging,sealing and electrical potting and encapsulation. The TEC 3200 can be left on
for long periods of time without having to worry about the glue overheating, this gun will
actually switch to a lower temperature and automatically return to full operating temperature
when used.
There is a 400 watt stainless steel heater cartridge for a quick 4 minute warm-up time and
capable of dispensing up to 8 lbs. of glue per hour
while only weighing in at 2.5 lbs.

POWER ADHESIVES TEC 6100 Pneumatic HOT MELT GLUE GUN  
Uses 1 3/4" x 1 3/4" Hot Melt Cartridges
$722.60 BUYThe TEC 6100 is a highly effcient dispenser using twin 250 watt
stainless steel heaters, which provides a quick 5 minute warm-up time
 and weighs in at only 3 lbs. This dispenser is capable of dispensing up to 11 lbs.
of glue per hour for the most demanding of applications.
The TEC 6100 features a fully enclosed heater housing with silicon rubber nozzle shroud,
A special non-stick coated piston for easy loading and to reduce glue meltback and also has
an audible and visual indicator for reloading to minimize downtime. The gun ships complete
with an integral dispenser stand, suspension ring, instruction booklet and 1 year warranty

POWER ADHESIVES TEC 6300 Pneumatic SPRAY HOT MELT GLUE GUN
Uses 1 3/4" x 1 3/4" Hot Melt Cartridges
$802.55 BUY
The TEC 6300 is a unique economical spray applicator. It only takes 10 minutes to
warm up with a 500 watt heated melt chamber.
The adhesive output is controlled by adjusting the air pressure and the spray pattern
 is controlled by using the rear mounted spray control knob.
 This gun weighs in at only 3 lbs. and can dispense up to 10 lbs. of glue per hour.
It is the perfect gun for covering areas up to about 10 square feet at a time.
This gun can also be used on heat sensitive substrates such as expanded polystyrene and
other kinds of plastic foams.

POWER ADHESIVES TEC 7100 Pneumatic
  SPEED-LOADING HOT MELT GLUE GUN
 Uses 1 3/4" x 1 3/4" Hot Melt Cartridges
$987.14 BUYThe TEC 7100 is a serious alternative to bulk hotmelt systems
at a fraction of the cost.
The most unique feature on this gun is a built-in speed loader on top which holds an extra
2 polyshots in reserve. This gun also has dual 500 watt heaters (1,000 watts total) with a 4 minute
warm-up time. When the trigger is pulled for use, the second 500 watt heater starts to operate
and enables the hot melt to be dispensed at a constant temperature.
This gun also has a built in stand and weighs in at only 3 lbs. while able to dispense up to
11 lbs. of glue per hou

CLICK HERE FOR HOT MELT ADHESIVE PRICES AT OUR
 HOT MELT DIRECT STORE
 

Toll Free 1-800-323-5158 Email customerservice@on-hand.com  
We honor these credit cards:
American Express-Master Card -Visa

_______________